Products

RazorCut circular sawblades make it easy to cut panels in finish cut quality at high feed rates. A wide variety of panel materials and surfaces can be processed perfectly – regardless of whether the saw cut is edged later or remains unprocessed.

The Diamaster EdgeExpert program provides impressive tear- and chip-free edges and smooth sides, even when processing micro-paper, veneers, foils and high-gloss laminates. The knife geometry is engineered for excellent results and the optimum ratio of quality and costs.

With the daily challenges in mind, Leitz has developed an innovative collet system made of stainless steel (NiRo) that combines an extremely high degree of flexibility with enormous durability. With the NiRo Collet chuck Premium, complex machining tasks can be mastered quickly and without problems.

The ThermoGrip® shrink fit technology overcomes the limitations of conventional chucks. Tool and chuck are connected as if they were made of one piece (monobloc contrusction). This enables the tool to cut at maximum speed, gives longer tool life and improves precision, even with higher cutting forces.

With the AccuCut circular sawblades, Leitz offers a solution that provides long battery lifetimes – without compromising on cutting quality. Its innovative design not only makes it particularly energy- and power-saving, but also especially long-lasting and robust.

With the BrillianceCut circular sawblade the reworking step is no longer necessary, therefore the saw cut edge can be glued, polished or flamed directly. An additional benefit is the BrillianceCut sawblade can be resharpened up to 20 times further reducing processing costs.

The thin-cut circular sawblades from Leitz combine extremely thin cuts with smooth, glueable finishes. In addition, the circular sawblades are designed for high feed speed rates which convert to maximising profits and with low running costs per metre.

From the cutting of wooden planks to the processing of wood-derived panels with a multitude of coatings as well as plastic or fire protection panels – the sizing sawblades from Leitz always provide perfect machining results combined with long tool life. Leitz has the correct tool for every requirement.

Leitz has developed a solution for many machining problems arising from the use of circular sawblades on CNC machines. The Katana for CNC machining demonstrates its strength, especially when the saw cut becomes visible on the workpiece. Most materials can be processed with one tool and also with the advantage of reducing the noise generated during cutting.

No matter whether it‘s a finish-cut in batch size 1 production or the splitting of stacks, Leitz circular sawblades meet all necessary requirements.

The Leitz WhisperCut circular sawblade is a particularly user-friendly and futureoriented sawing technology. The circular sawblade is quiet when idling and in use with excellent cutting results in all conventional panel materials.

With the automatically adjustable grooving cutter, it will be possible to change the groove width on just one unit during operation. More flexibility and efficiency in series production is difficult to imagine.

With the CentroPlan planing cutterhead from Leitz, it is possible to reduce production costs and at the same time generate perfect finish qualities without sacrificing the performance of the overall system. In addition, the tool is very sustainable due to the use of serviced turnblades.

Leitz DFC®-Extraction hoods are individually designed and precisely adapted to the application. Thereby, all processing options such as profile variants or different material thicknesses are taken into account. The results being extensive cost savings through improved cutting, the reduction of cleaning at the machine and dust-free workpieces.

The light and quiet Diamaster WhisperCut® cutterhead is specially designed to reduce such strains. Due to its optimized tool body shape and low weight, noise pollution during jointing and rebating is significantly reduced and the quality of the workplace is improved. The resharpenability of the system with replaceable cutting edges also guarantees high cost efficiency. Optionally, users can change the cutting edges quickly and easily on site.

The Leitz variable angle cutterhead system offers individual advantages for every company size and thus helps to achieve a clear production and quality. The system is not only flexible and sustainable, but also improves production efficiency.

The universally applicable HeliCut-System is the perfect tool solution for different materials. This opens significantly more advantages in terms of quality, efficiency and sustainability.

The Heliplan planing cutterhead is designed for pre-planing tear-free planed surfaces and is suitable for finish machining. Other benefits are HeliPlan planing cutterheads are quiet, long-lasting and easy to use and maintain.

MC33 planing knives from Leitz increase productivity due to longer tool life and reduced sharpening cycles. In addition, the degree of utilization of the machine increases due to reducing the number of necessary set-up processes.

With the profile cutterhead for backserrated blanks, Leitz offers a tool for machining any profile using standard tool bodies and individually profiled blanks. By mounting straight knives, the tool can also be used for planing.

Hydro planing cutterheads from Leitz are extremely durable compared to conventional tools. The Leitz knives supplied are of such a quality, they need be changed less frequently while maintaining a consistently high machining quality.

The new DT Premium compact hogger is the solution for increasing productivity thanks to its long tool life – with perfect quality on the edge and cutting surface. Thanks to the new tooth shape, optimum machining results are achieved over the entire life cycle of the tool. The design enables efficient chip removal and the vibration-reducing tool body further increase the tool life and thus the economic efficiency.

The minifinger cutters from Leitz produce high profile accuracy for easy handling. They are robust and long-lasting compared to other tooling systems.

The tipped profile cutter from Leitz combines the benefits of the stable tool body and the wear-resistant cutting materials to a powerful and long-lasting tool system. A perfect basis for outstanding processing quality.

Leitz flexTrim profile cutters allow simple profile changes via the machine control due to the multi-profile technology. This saves time and increases quality.

The ideal solution, from the tool side, are TurboHawk minifinger cutterheads from Leitz. They offer numerous combinations, a high number of teeth with a small diameter and precise processing results. In addition, they have a significantly larger resharpening zone compared to conventional tools.

The TurboPlan PLUS hydro planerhead from Leitz fully harnesses the potential of high-performance machines. The higher number of teeth enables the maximum feed rate to be used while keeping the best planing quality – and thus a significant increase in productivity. Knives with Marathon high-performance coating extends the tool life many times over. Replacing the knives is also quick and safe: The simultaneous hydro knife clamping system saves valuable time during set-up.

With the VariForm profiling tool system, Leitz provides users with the multipurpose solution for combining quality, variety and cost effectiveness. Its concept is simply ingenious: flexible thanks to a simple tool body design, low tool costs due to multiple resharpening possibilities, versatile due to numerous knife profiles.

The Leitz VariPlan Plus planing cutterhead is a constant diameter tool system that can be resharpened several times without change in tool diameter. By eliminating any adjustments after the quick and easy knife change VariPlan Plus cutterheads improves efficiency, quality and economics.

With the VariPlan Plus Integral planing cutterhead, Leitz offers a tool system that combines the pre machining and finishing steps by using corrugated and smooth cutting edges. Thus, the tool is especially suitable for machines with only one spindle per processing side.

By adjusting the width of the innovative, adjustable diamond jointing cutters from the EdgeExpert line, unused cutting edge areas can be brought into the quality-forming cutting area of the covering layers. Perfect machining quality of the panel edges and significantly more efficiency in the overall process are possible with this Leitz solution.

A profile tool system proves its superiority when it covers a wide range of applications and at the same time ensures outstanding cut quality with long tool life. The Leitz ProfilCut Q cutterhead system offers these advantages and sets the standard in the industry. Even unusual profiles can be perfectly implemented. Whether in manual or industrial use for window, door and furniture production – ProfilCut Q delivers perfect results.

ProfilCut Q enables the processing of aluminium with customized profiles. Numerous profile variants can thus be implemented in a single work step. The high-precision replaceable knife system as well as different cutting materials and available coating technologies guarantee a perfect result.

With the unique combination of an ultra-light aluminium tool body and resharpenable, profile and diameterconstant diamond changing knives, ProfilCut Q Diamond ensures efficient machining of abrasive materials. Precise and without loss of performance.

ProfilCut Q PLUS sustainably reduces manufacturing costs with resharpenable, constant diameter and profile cutting edges. Especially for plants with a high output of parts, this system offers more efficiency and productivity while saving resources.

ProfilCut Q Premium is the ultimate solution for companies that want to get more out of their production. With cutting speeds of up to 120 m/s it is one of the fastest tool systems in the industry. The resulting reduction in cutting time saves users time and money.

With the multifunctional tool family ProfilCut Q, exchangeable knife and resharpenable constant diameter systems, as well as carbide and diamond cutting edges can be optimally combined. This unbeatable advantage enables a tailor made and economic solution for any requirement which is unique within this scope.

The HeliCut Monoblock can be used for various applications such as drilling holes, pockets, tenons and rebates in perfect quality. This eliminates time-consuming tool changes and downtimes. The monolithic design also makes the tool very stable and dampens vibrations.

The Diamaster PRO³ and Diamaster PLUS³ routers cut at up to 50 % higher feed rates with a purposefully engineered knife arrangement, designed to maximize tool life and performance while maintaining perfect cut quality. This is possible with Real-Z3 technology: closing gaps between the individual knives to increase the number of effective teeth.

With the new HeliPlan planing cutter from Leitz, an almost mark-free surface finish quality can be achieved. Together with efficient chip removal and higher tool speeds, the entire workflow can be optimized. When machining plastics, the HeliPlan planing cutter enables finish cut quality.

The new range of extra-long HS-twist drills from Leitz has been specially designed to meet the specific requirements and materials used in wood construction and enables users to save noticeably more time when boring deep holes. In addition, the tool life is significantly longer, which also reduces production costs.

The Leitz solid tungsten carbide hinge boring bit with three cutting edges not only drills faster but also better. The resulting consequences are fewer rejects and the reduction of manual rework on the workpiece.

The use of quick-clamping drill chucks reduces machine downtime considerably. Drills can be changed quickly, easily and without additional tools directly on the machine. The high concentricity accuracy of the system also enables perfect drill holes.

The Leitz Hydro-Duo clamping element with fine adjustment is characterized by its high-precision, stepless fine adjustment and its easy handling. Due to the high-precision fine thread, the clamping sleeve can be adjusted exactly without loss of accuracy. This reduces set-up times considerably.

The hydroclamping of the Leitz Hydro-Duo clamping elements with clamping ring centres the tools absolutely play-free with perfect concentricity and balancing quality. The tools can be positioned quickly and accurately on the shaft without disassembly.

With Leitz Hydro-clamping elements, tools can be mounted on the spindle centred and completely play-free. As a consequence, perfect machining results and longer tool life is possible with the high concentricity and balancing quality.

In the production of fibre cement panels, carbide-tipped circular knives for cutting the raw panels wear out particularly quickly. The consequences are a stop of the line and time-consuming tool changes. In this situation, diamond-tipped circular knives from Leitz help manufacturers to save time and money. EvolutionCut ensures long system lifetimes at high feed rates and this with consistently perfect machining quality.

With the Diamaster WhisperCut Prismatic Rebate Cutterhead, Leitz offers the solution for fast, low noise and high-quality V-groove cutting for precision mitre edges.

Leitz has developed high performance PCD shank cutters especially for dry CNC machining Aluminium sheets. These tools achieve significantly higher feed rates and better finish quality than comparable tools with cooling lubricant.

Leitz, with its long-standing experience in the professional machining of NF metals, has further developed its range of tools and now offers solutions for numerous challenges in machining profiles as well as extrusions, panels or metal sheets.

When cutting glass, carbon or natural fibre mats, the demands on the tool are extremely high. Precise cuts, highest cutting quality and long tool life are required. Ultrasonic knives from Leitz, meet these requirements exactly. An additional advantage is the service competence of Leitz offering reconditioning in manufacturer quality. The result: perfect cut and reliability!

Leitz offers an optimally coordinated range of tools for the processing of Aluminium composite panels, whose versatility is particularly impressive due to its high quality and performance.

With its comprehensive standard range, Leitz offers ideal tool solutions for the most varied types of machining.

Compact Laminates, such as HPL, hard paper or hard fabric, are typical examples of duroplastics. Especially High-Pressure-Laminates (HPL) have a wide range of applications due to their design and robust physical properties. This is evident in sectors such as furniture, kitchen and trade fair booth construction, in facade construction and also in the sanitary sector. Since Compact Laminates usually consist of melamine or phenolic resin impregnated papers or wood fibres, their machining is always associated with high tool wear. The use of diamond cutting materials from Leitz is the solution in this case.

Leitz offers an optimally coordinated tool programme especially for machining PMMA, which is particularly impressive in terms of quality and productivity.